Posted by DeereTech4020 on June 16, 2014 at 19:37:38 from (76.235.173.149):
I recently purchased a 492 New Holland Haybine in great shape with the acception of the wobble box. Uppon removel of the wobble box I found that it was not only dry inside but rusty into the bargin. My local dealer informed me that even they won't attempt rebuilding these gearboxes and only sell Remanufactured units. In addition my dealer didn't even want to sell me the bearings and seals needed to attempt the rebuild. Fortunalty my Deere dealer was able to supply me with the needed bearings and seals.
I have learned that New Holland no longer offers the specs for rebuilding this gearbox to even their dealers. The wobble box is actuially very simple. I'm looking for any advice on the yoke preload and any shimming specs that any one has to offer. I have a dial indicator, micrometer and I know how to use them just need some pointers on what kind of end play or preload I should be looking for.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
