Posted by robert major on June 20, 2014 at 13:42:29 from (216.130.81.234):
In Reply to: Re: Yep, She Be Shot posted by Allan In NE on June 20, 2014 at 07:34:11:
Hi if that turbo did that in 60 hours I would be really worried it may have underlying cause/ other than junk rebuild. plus you say you got the tractor used. Maybe somebody else had this problem before and dumped it instead of spending the Cost of fixing. I had a 5488 here for a customer for something else, I can"t remember if it has an oil gauge or not. How many hours on the rest of the tractor just out of interest. I"m kinda suspecting the manifold was changed due to warped sealing surfaces at the head side and probably manifold flanges. It was maybe blowing the gaskets out, maybe studs broke changing the turbo also would wreck it. Had a 466 truck motor here for a guy that was warped, had to have the side of the head machined when i inframed the motor and had the head re built. was also wondering what the air filter elements are like, new or just blown out and put back, never seen turbo damage from plugged filters/ air starvation here, but it may be possible As with all online diagnoses I can only guess this issue/ cause without seeing the tractor.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
