Posted by ss55 on July 22, 2014 at 12:13:54 from (50.81.112.224):
In Reply to: Plow posted by Drahthaar hunter on July 22, 2014 at 00:15:44:
How many acres do you need to plow and what does your tractor weigh? You might be on the very low end of PTO HP range to pull 3 bottoms, but does it have enough weight and drawbar HP?
If you have to add an extra 50% in weight to the tractor to pull three bottoms, you might get more done in a day pulling two bottoms faster. Try to plow at 5MPH or faster rather than straining the guts out of your tractor at an actual 3.5 MPH loosing 10+ percent of your ground speed to wheel slip. That also gives you a better chance to plow tough dry sod if you need to, or to pull a two times width spike tooth harrow behind the plow in the spring.
Used plows often have worn cutting edges and rusty moldbords that can pull harder than a plow in top condition. Can you borrow a plow to test what works best for you, or try a plow before you buy it? I'd try 2x16 or 2x14 to start.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Grain Threshing in the Early 40's - by Jerry D. Coleman. How many of you can sit there and say that you have plowed with a mule? Well I would say not many, but maybe a few. This story is about the day my Grandfather Brown (true name) decided along with my parents to purchase a new Ford tractor. It wasn't really new except to us. The year was about 1967 and my father found a good used Ford 601 tractor to use on the farm instead of "Bob", our old mule. Now my grandfather had had this mule since the mid 40's and he was getting some age on him. S
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.