Re: Re: Advice on first tractor
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Matt Gessner on August 03, 1998 at 06:12:57:
In Reply to: Re: Advice on first tractor posted by Paul Fox on July 23, 1998 at 06:12:45:
:
: : I am looking for advice as to what kind of
: : tractor to buy. I need a strong rotary cutter
: : for clearing up to 3" thick brush. I want the
: : capability of a front loader and a bucket. I am
: : new to the whole tractor arena, so I want to know
: : what size/make tractor will do what I need. I
: : have not decided old or new. There is a romance
: : to old tractors (I know you already know that),
: : but I don't need another project. ('46 Buick,
: : '53 Chevy pickup, '69 Camaro, ... already on the
: : project list.) I have no problem with a little
: : TLC, but I need a tractor now. Suggestions? : : Thanks! : Matt: : You're on the right track...old tractors are neat, but there's a reason new ones sell...things like full hydraulics, live pto, power steering, operator comfort, etc. I'd look at a used modern tractor, say no more than 10 years old. If you're going to be running a big bush hog, 30-40 hp might be a good idea. I'm running a 5' bush hog with a 20 horse John Deere diesel, and I can cut 3"-4" stuff, but it's hard on the gear. General recommendations: Diesel is the only way to go, don't even consider gas engines. Four wheel drive or front wheel assist is a must where I am (Maine) but may not be if your area is basically flat and mostly dry. Power steering is a blessing. A bucket loader (aka front end loader) is about the most generally useful attachment money can buy. Gear drive with a multi-speed rear end is very versatile. Hydro drive has it's points, but adds quite a bit of expense to the tractor. As far as brands, I'm a big John Deere fan, but Kubota, Ford, and Yanmar, among others, are all good tractors. An important factor to consider is availability of parts and service. On a used unit, look at general condition, including paint and sheet metal as an indicator of how well it was cared for. High hours is not necessarily a drawback if it was well maintained, with fluids and filters changed regularly. Hope this helps, and if you have specific questions, I'd be glad to give you my two cents worth. : Paul Thanks again for all of your input. I bought a Long 2360 on Saturday. It is a '93 w/ 220 hrs on it. It has 35 PTO hp, and handles a 5' rotary cutter w/ ease. It handles great -- my wife even drove it out the driveway and back. I plan to put a loader on it in the near future; it already has enough hydraulic gpm to run the loader. I am pleased with my decision, and your help was much appreciated. Matt
Follow Ups:
Post a Followup
|
