Posted by OliverWhiteFan on August 24, 2014 at 11:23:35 from (173.85.67.148):
Ive read numerous forums and seen just about every part of the process of changing over a positive ground system to a negative ground system on a 550 explained, except for what it takes to change polarity on the 12v positive ground generator with voltage regulator on top. Im in the process of changing over the pos ground to neg ground and installing an electronic ignition. Ive switched battery leads, changed the wires around on the 12v coil, changed the wires around on the ammeter, now all thats left to do is tackle the generator i think lol. Would like to keep the generator on the tractor as opposed to switching to an alternator being its been rebuilt not long ago and ive heard they can be switched over to work on the neg ground system just fine.
Does anyone know what it takes to make the 12v pos ground generator work with the neg ground 12v system? thanks
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
