Posted by NCWayne on September 23, 2014 at 21:10:09 from (173.188.169.54):
I've been studying up on the workings of an old D9 CAT, made somewhere between 1956 and 1959, tonight before going back out to work on it tomorrow. In the owners/operators/maintenance manual, there was a section on cleaning the turbo on your machine. The procedure was to take a flexible pipe and hook it to the intake(cold side) of the turbo. Then fill the pipe with a gallon of water and a non-foaming detergent. From there hook the pipe back to the outlet (cold side) of the turbo and start the engine. It said to run the engine at wide open throttle for awhile and then check to see how the turbo looked. If still dirty do it some more, if clean then disconnect the line off the inlet side and let the turbo blow the water out through the tube, in a safe direction.
I've heard and seen a lot of old tips, tricks, or other maintenance/repair related things over the years, but this was a first for me. So, how many of you have ever washed a turbo this way, or have even heard of doing such?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
