I have a older style single bale wrapper. I have owned it for the past three seasons.I bought it on an auction for $2200.00. Yes , it does take more time to wrap bales with a single wrapper, more time with a old style wrapper like mine , where I have to put each bale on the wrapper with the loader tractor, as apposed to the new style which will load and wrap the bale for you, all from the tractor seat. But , we get along just fine with ours. I will make around 400 per year. cost about $2.75 per bale for plastic this year. I have tried to stack the bales 3 high , but found if the bales where very wet, they would tend to sag and leak air over time. This would soil the bale. Now I just place them on their ends, about a foot apart. Cows love the feed, I like the ability to make hay sooner, and get more hay done with high feed quality. Thought that hiring someone to wrap for me, in-line or single, was like buying my own hay back, just too many dollars going down my driveway. I have posted some last years pictures, hope that my comments will help, and glad to answer any questions you might have. Bruce
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
