Posted by Danny Prosser on November 03, 2014 at 04:14:56 from (170.141.177.62):
Well I looked at it again this weekend and I figured out why it was getting to hot. I had the pressure line from the pump hooked to the in port on the valve for the lift cylinders! I swapped the lines and now it dosen't get hot, however it still don't work. I think it's the control valves. When I got it somebody had a bolt stuck in the relief valve and the check vale didn't have a spring or metal ball. I guessed and tried to replace the missing parts but I think I just need to replace it. Where can I get a good price on one? It needs to be open center I believe. 2 spools one single acting and one double 1/2" in lines and 3/4" returns and it has a big hose on the bottom returning to the tank. My wife is about ready to kill me over this thing and the money I've spent so far i gave $250.00 for it and $100.00 in gas to go get it. Add in a new pump, bracket, one hyd line and complete drive line and now I'm in for about $750.00. I'm sure you know how moma gets about money spent on our toys!! Thanks for your help my friends.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
