Posted by NY 986 on November 05, 2014 at 14:34:30 from (174.236.7.47):
In Reply to: Field Tiling posted by Curt Cooke on November 05, 2014 at 07:48:24:
There are a lot of variables involved in tile installation. Installed tile needs to be at a grade (fall) for water to promptly exit the system. Grade has to be consistent and that is near impossible to do with a backhoe in a situation where the tile is near to flat. Tile should be 30" or deeper to minimize risk of crushing plus in northern regions so as not to freeze up. Soil type dictates distance between lines for effectiveness. Clay soils need spacings of 50 feet or less apart unless the field itself is sloped 8 to 10 percent. Sandy soil will allow for greater distances apart. You need to check with FSA for wetlands or conservation issues especially if you have not owned the ground in question for long. The field should be surveyed with a transit to determine grades. Staking with string levels or lasers work well to assure the proper depth of the machine doing the installation work. Trenches have an advantage if old tile is suspected of being in the field.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
