Posted by Bill in Eastern WA on November 28, 2014 at 20:43:15 from (75.139.184.221):
I have this old stand of Alfalfa that I sprayed this fall, and today I tried out the 1155 with a four bottom Massey Ferguson 57 roll over plow. First time I have ever plowed let alone set up a plow. I am pretty happy with the results. I am plowing deep and the four bottom plow is a good match for the tractor in our soil. I was trying to find some weights for the front of the tractor, but that's been a challenge. I have to take things really easy when we get to the end and need to go back the other way. My local dealer also told me to put in a flow control or restrictor for the cylinder when rolling over the plow because the gear that rotates the plow is no longer available. So I take it really easy when I get ready to pull up and turn around. The draft control works really well despite not being used in I don’t know how long. The plow pulls really well. I'm impressed, but you have to wear ear plugs.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
