I thought that was wild, some of the things our body some puts up with or minimizes to the point nothing is done about it. In this case, and I saw the photo before you posted it, that is a substantial piece of metal, I cannot even imagine, (and they do x-ray you prior to) what would happen if he was placed in an MRI machine ! All that comes to mind is the Wile E Coyote episode with the large magnet in the cave, and the Eiffel tower and the trail of objects being drawn in ! LOL !
I had a nice piece of white pine stuck in my forearm, just below my elbow for months, as I determined it came from the trailer loads of rough cut lumber we were handling for a business we had when I was in high school. I was cutting the boards to size on an old C H & E sawrig, and must have picked up this large sliver somehow, thing was almost 2" long. I was in english class when something was bothering me on my arm so I had scratched it, felt a bump, gave it a squeeze and this now rounded smooth piece of white or some kind of pine started poking out ! This was the middle of winter, I had not cut a board since the summer time. It looked like my body was trying to consume it or something was working on it, very smooth all around.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
