Re: Re: Power Steering problem on IH574
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by K.Ray on August 14, 1998 at 17:34:27:
In Reply to: Re: Power Steering problem on IH574 posted by JEFF R on August 14, 1998 at 17:13:03:
:
: : When I turn the steering wheel fast it's real hard
: : but when I turn it slow it does fine.I changed hydrl. filter and fluid 4 hrs. ago could it be the priority flow divider spool in the MCV or
: : the steering relief valve also located in the
: : MCV?How do i check the divider without a Flo Rater?The pump seem ok because it drags the tractor down when the remote valve is operated
: : Please Help!!!!! : If your hyd. fliud has metal fines in it your pump may be going bad. This stops up the valves in the mcv valve. I don`t know how to clean it out. Good luck and post back what you find out. Hello Jeff, I had a similar problem on a car once. If it were cold or loaded a lot, the steering would get stiff. The problem turned out to be the screen in the resuvoir was stopped up. Someone had mistakenly put power steering sealer in it instead of fluid. The pump was starving for fluid and would draw air into the system and foam the fluid even though the resuvoir appeared full.
Good luck, K.Ray
Follow Ups:
Post a Followup
|
