Hi The computer diagnostics can be a pain if the computer won't accept it's plugged into the tractor. we had that problem with a tractor in the dealers I worked at. It took The distributors man 2 days, and asking his work buddys what was wrong. to diagnose it. There was a 3 milli amp fuse blown in the system. we Changed that and the computer worked to supposedly tell us what was wrong. It turned out there was no codes!. it was that stupid fuse we couldn't find as it wasn't in the shop book diagrams, had shut the computer down!. It's a good job that machine was under warranty, if not that fuse would of cost $2000 in shop time and 60 cents for the fuse!.
I also hear from a good authority you don't want to miss payments on newer Cat combines. A guys machine stopped dead in the field. They called the dealer, the tech came plugged the comp in and said $45.000 will fix the problem. The owner coughed and said whats wrong for that money. The dealer tech said pay what you owe and Cat will turn it back on!.
I know a guy drives one of those JD self diagnostic tractors, and the mechanic phones him to find out what field it's in once in a while. Regards Robert
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
