Posted by Mark - IN. on February 18, 2015 at 18:14:13 from (73.51.22.30):
In Reply to: walk behind trencher posted by steven in tn on February 18, 2015 at 16:15:01:
I've used them about three times. They're self propelled, all you have to do is guide and walk. The first time I used one was brutal, but my fault. When the guy showed me how to engage the drive tires, he showed me on one side without mentioning the other side needed to be engaged as well, and I didn't think about it. When it came time to trench, I engaged the one side, not the other, so one side doing all of the propelling, it tried to propel in circles. Took a lot of umph to stop that, UMPH for about 300 feet. I was about 10' from done when I happened to see the engage lever for the unpropelled drive tire. The last 10' went very smooth and very straight. Second and third times using one didn't make that mistake going about 700' or so both times. Big difference if you let it do the work for you.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.