It all depends on soil. I own what is reputed to have been a 3-4 plow tractor. On my clay I can make use of a 2-14, don't plow too deep and I'm standing on the diff lock or riding a brake quite often. I generally have to put the double ring chains on if it starts getting wet too. Not a fun farm to plow at all.
Local story is that back in the late 50's a local tractor dealer about 15 miles away got mad because he had several complaints from customers who bought a 45ish hp tractor from him to use on our clay. He sold them 3-12 plows and promised they'd plow anywhere with those plows. Finally he got fed up because the complaints were hurting his business and scheduled a field demonstration on a farm in our town to show the locals here how a real man that knew what he was doing could plow. On the big day there was a huge crowd (by our standards anyway- 45-50 people) and he set out to plow a field. He made it about 15-20 feet and came to a dead stop. He fiddle farted around for about 2 hours before admitting defeat. After that tractors sold in our town got a 2-12 set of plows and the dealer came out to set them up correctly. I understand some farms got 2-10's! I have a set of 2-10's said to have come from that decision.
This post was edited by Bret4207 at 04:59:21 02/27/15.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
