Posted by Adirondack case guy on March 07, 2015 at 16:22:56 from (74.69.160.79):
In Reply to: Steel VS Wood building posted by sparktrician on March 07, 2015 at 14:50:00:
Totally forget using wood for a building that size. Wood trusses can be built, to span a hundred feet, BUT the roof peak will be incredibally high which will cause wind loading issues and take twice as much steel to cover it. Steel rafters can be built to support a 1 or 2 on 12 slope and the roof blows clear of snow rather than allowing the snow to build up on the lea side of the building. The low pitch also allows the whole roof to warm up when the sun shines in the winter. No mater what type of construction you decide on you also need to consider all the snow that is going to come off the roof and what it will do to the lower exterior walls as it builds up there. Eave overhangs should be considered. I'm not just blowing smoke. I sold and erected Essex steel buildings. The pics are of a couple of buildings we built for two machinery dealers in the area. They go up fast once the piers are in place. Erector set construction. A 3 man crew and suitable equipment can efficienty erect them. Loren, the Acg. PS my e-mail is open if you have further questions.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
