Re: CUB CADET TRANNY
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Jeff on August 20, 1998 at 10:08:59:
In Reply to: CUB CADET TRANNY posted by PJ on August 19, 1998 at 18:57:39:
This is a common problem with all of the older models
what you need to do is to remove the shifter by removing
the 6 or 8 bolts and pulling it out. Then either weld it
your self or take it and get it welded. When you look at the
under side of the shifter you will see that the weld that
holds the shifter handle cup has come loose. You can still
purchase the part however it is quite expensive and a good welder
should be able to align it and re weld it. You should take out the
spring pin and remove the spring with the rest of the assembly.
This will ensure that the other parts are not effected during the welding
process. After the welding then just reassemble and reinstall using
a new gasket or use the old gasket if not torn with some permatex blue
gasket goop. Hope this helps Jeff
Follow Ups:
Post a Followup
|
