Posted by Bill(Wis) on April 21, 2015 at 07:15:47 from (216.46.173.36):
In Reply to: soybeans posted by Don-Wi on April 21, 2015 at 00:14:47:
I recommend rows narrower than 32". Either double over with your planter or use the drill. Put down Roundup plus whatever you want to kill the volunteer corn and don't waste your time cultivating. My cousin in Lind Center bought our old 495 planter and likes it for corn but says he has better results drilling soybeans. I've never planted narrower than 15" although I'm going to try it on a few small fields this year with a Great Plains drill in 7.5" rows. I normally plant about 165000 seeds per acre. 1.7 or 1.8 maturity. Last time I had soybeans I averaged 55 bu per ac. My soil varies from sandy loam to heavy black to red clay nine feet deep. Sometimes all in the same field. So, some acres were running 70 bu ac and some about 35 give or take. Due to that, I had soil tests done on 2.5 acre grids (GPS plots) and apply fertilizer accordingly. My estimated input costs this year will require 27.5 bu/p/ac to break even if soybean prices hold. Some soybean seed is pre-innoculated and some isn't. Better check that out. I don't have any opinion on fungicide and pesticide seed treatments but all of my seed this year will be treated. I really like soybeans better than corn although I rotate every year. They're completely different from corn. Corn is as dumb as a rock but soybeans seem to have an intelligence all their own. Not so many truckloads in the fall, either. You'll have plenty of places to sell them from where you're located.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
