This stuff, or a different formulation? Some things have just a letter or two behind them, making them a completely dofferent formulation, so we need to be exact, and your name of the product wasn't any too clear? I'm not trying to be critical, but the details on this are -important- is all.
If this is just a generic 4lb glyphosate product, then technically once it is sprayed on the ground it attaches to clay bits or kills green plants, but has no activity on any seed in the ground.
So, you could plant an hour after you sprayed it won't affect whatever you are planting. Has no effect at all on the seeds in the ground.
Legally, you need to follow the label.
To make sense, you need to let the weeds die before you work the ground up. Typically folks like to wait 3-5 days for the weeds to translocate the chemical to their roots so the glyphosate takes affect and actually works for you.
So, you could plant right away and not harm your seeds; you probably want to wait 3-5 days so the spray does you some good.
Again, this would be for a generic glyphosate with nothing else in the mix. I'm not 100% sure what you actually used?
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.