Agree with that. Down here we call them attic fans as they vent into the attic. When I built my house (by my own hand) in '79 I had no AC and the attic fan was THE cooling mechanism for the house. I had to mount the shutters TO the ceiling as I used pre-formed trusses for the rafters and I didn't want to cut into a 24" spaced truss to install a 36" fan. The fan sat on the rafter and I build boxes for both to make an air plenum. Took 3 years to get the money to put in a 2 ton window unit and that was used, for $135 and too heavy for one person to lift. Wife was a good trooper on that. Never griped about being hot.
I moved to the country and built the house as self sufficient as I could after reading Howard Ruff's "How To Survive the Coming Hard Times". Got-er all done and sat down waiting for the sky to fall................never did and I was happy about that. Course I didn't have the $10k he said that you needed to have stashed away in gold and silver coins. The Krugerrand was the Gold of choice at the time; one Oz of 99.99999 pure gold, mined and minted in S. Africa.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
