Posted by Sparkman44 on September 01, 2015 at 13:47:04 from (192.158.40.94):
Hi- I have a Ford 881 that uses LP fuel. I bought it from my aunt about 5 yrs ago(they bought it new in 62) and it's really been a good little tractor. I've really done nothing to it except change filters and fluids. Doesn't get worked hard but has really been a great starting machine in any kind of weather.
Anyway-I guess until now :), it's decided not to start. I don't know much about LP tractors. I did try a little troubleshooting and it has good spark. I think the diaphragm in the mixer/vaporize or whatever the right term is. Without the tractor running but the vapor on, if I crack the line between the mixer and the carb, fuel is coming out and from I've read I don't think it should do that.
So I thought I'd probably start with a little rebuild on that mixer part. My guess is it's original- on top of it, it says ALGAS and then MET R FLO under that with a L.A. 21 Calif. under that. Dealer says none of the parts are available and the internet hasn't proved helpful yet so I'm looking for any help anyone can provide on finding parts for this little unit, or if you think I'm going down the wrong path let me know that also or if there some other Impco or other brand of these parts that I need to replace the whole mixer with? Any info or help is greatly appreciated! Thanks.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
