Posted by Rich_WI on November 20, 2015 at 17:15:23 from (50.50.68.69):
In Reply to: moisture in oil posted by jim_uny on November 20, 2015 at 11:30:06:
Quoting Removed, click Modern View to see
Put 2 spigots on a bucket and let the oil sit for a while, it will seperate out. One spigot on the bottom and the second one up 4 inches or so. When you drain the bottom spigot, you will get clear water, then the milky oil, then clear oil. At that point, the upper spigot is safe to drain from and use.
When Im draining from the bottom spigot, I dump the water. When the milky oil comes out, I save that and pour it back in the top when I done getting the good stuff. Its good oil, just needs more time to seperate out from the water.
Several times a year I drain out the water, I welded a pipe nipple on my drain plug and put a ball valve on. I drain out a half gallon or gallon and pour it in the pail. I replace the oil from the tractor with good oil I took out of the pail a few minutes earlier (so it done mix together before I pull out the good stuff).
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - On the Road with Dave Gohl: Auction Musings - by Dave Gohl. I was thinking the other day about all the auctions I've been to in the last few years. There've been many. Some have been very good, some have been well, disappointing to say the least. But no matter how good or bad auctions may be, we always seem to stay until the item we've come for or are interested in is on the block. I've been to some auctions near and far. I think the furthest has been the Two Cylinder 7 in the Amana Colonies last year. Lots of stuff, lots of people. I've also atten
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
