Posted by dschaefer55 on March 01, 2016 at 20:22:40 from (74.207.187.6):
I was born in 1955 on a grain & cattle farm in North Dakota. First tractor I ran in the early 1960's was a IHC Farmall A. As I got older I ran a IHC WD9, seems like this was just before 4 wheel tractors came off production lines. Back then I read Farm magazines like Successful Farmer, Farm Journal, Dakota Farmer and others. I remember stories & pictures about farmers hooking two, 2 wheel drive tractors together, a home made 4 wheel drive tractor. Taking front end off one tractor and mounting it on the back off a second tractor. Some how running the controls ( throttle, shifting and steering) from front tractor back to the rear tractor. Anyone see this or do this? Was I dreaming or did this really happen? What year did factory made 4 wheel drive tractors come out? I was reminded of this when I looked at Yesterdays Tractors vintage ads and saw the 1970 White Moline A4T 1600. Thanks for the memories!!
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
