Posted by FC Andy on April 11, 2016 at 15:43:49 from (74.126.84.52):
OK,I asked this on the IH board, thought I'd ask here, too. So I'm wondering just what my Farmall 806 will lift. Here's the details: mine is a fast hitch tractor, I have the 3 point adapter arms. I rebuilt alot of stuff last year, and the Hydraulics now have the 2500 psi relief valve, 15gpm pump, and I wound up with a 1086 lift cylinder because my original was scored too bad. I think 1086's had a higher setting on the lift cylinder relief valve than the 806 originally had? So on to the next part of my question. My FIL and I are looking at machinery together, and one of the potential buys is a 15' JD 750 2pt. hitch drill. Now, I remember pulling one of these drills with a JD 4430 for my best friend's grandpa and it was no problem, but a 20' 1560 maxes out a 4430. I want to know if the 806 will handle a 15'. I know you have to buy a kit to make the drill work on an open center tractor, hopefully it is still available? I'm sure I could pull a dolly wheel drill no problem, but I don't like the Idea of a dolly drill for lots of reasons unless I HAVE to get one due to tractor capacity. Thoughts? Experiences? Thanks! -Andy
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
