Hi Not related to Case either and hopefully not your problem. I had a customer bring a tractor into my shop once he had partly seized the motor due to a cooler line bursting, and it bent the crankshaft slightly in the process. when it was running and the clutch pedal was pressed you could feel the push on the pedal as the bend came out and went back in as it turned the clutch/flywheel assembly . apart from low oil pressure and junk in the oil filter, The untrained guy would of bought it in a sale and never really known until it blew up at some point . It didn't knock or anything.
if the release bearing was riding on the clutch release levers it would do the same thing . Does the motor look like it's had the oil pan off recently or is there any known motor/clutch work been done in the last while?, maybe someone "Fixed" a problem, or "Didn't like what they found" and dumped it. Yes it does happen I have seen guys get a bad deal before with new to them machines. It wouldn't be the first time something like thats turned up here to be fixed in my shop within a month of a new owner. Regards Robert
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
