You will get little to zero return out of any lime spread now in this year's crop. That is why lime is normally fall applied. It takes six months to a year to get any response and then you get action for about two years after that. Pelleted lime will work faster but cost 10 to 15 times as much money. I can get regular lime applied for $10 a ton where Pelleted lime is around $200.
You did not say where your located at????? This makes world of difference. Does your area have a history of being lime deficient??? If not then I would forget lime now and just fertilize for your "normal" yield. Then this fall soil test and adjust your fertility then. You will get a better return on investment from just fertilizer this first year.
Also how long do you have the field rented for??? The norm around here is for the landlord to have to pay back the tenant for lime applied if they are not the tenant the next few years. It is a sliding scale. First year after application 75% of the original cost. Second year 50% of the original cost. Third year 25% of the original cost. So I would only lime if I had a longer term contract or a lease spelling out the cost share of any lime application.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.