Posted by Ron-MO on June 02, 2016 at 06:36:17 from (24.177.135.105):
In Reply to: Re: Camery update posted by Mike M on June 02, 2016 at 04:55:10:
Does not surprise me at all after seeing a Tundra frame replaced at well over 200,000 miles. It belonged to a guy I worked with, and there was a huge issue with those older Tundra frames rusting and breaking. He got a recall notice, took it in, and the handed him keys to a rental, and he never saw the truck for 2-3 months, and Toyota footed the rental while it sat in line waiting for a frame. I guess that dealership alone replaced a lot of Tundra frames. I have a 1998 Camry, and have nearly 300,000 on it. 4 cyl engine never been apart, and I change oil around 4K, and never add a drop. I used to be a diehard Chevrolet guy, and have never been without a Chevy pickup since I could drive, but I will have to say this old Camry has been the most troublefree and reliable vehicle I have ever owned, especially considering I paid only 2,000 for it (was a one owner used car with 170,000). I have driven it over 100,000 miles, and only replace timing belt, water pump, and tires which are normal maintenance items for it. At this point, it runs/drives like a new vehicle so I see no need to replace any time soon, so I plan on heading it toward 400,000 if no major issues crop up. A few years ago you could not give me a rice burner. I will say that I do not believe the newer Camry's are as well built as the older ones, and I have no desire for one of the V6 cars.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
