OK, its like this; My rifle started as a Marlin 20. I sold the stock and sights for what I paid for the whole rifle. I did a lot of machining modifications on the receiver/bolt. I eventually put on a 20" Green Mountain barrel blank that I machined and chambered (PTG match) myself. Fitted a Richards Microfit rough finished stock with a raised cheek piece, a cheap folding bipod and a $35 (including mounts) Chinese 24 power scope. My wife's started as a Stevens 56C (once again I sold the stock and magazine for what I paid for the whole rifle. It didn't come with sights) and highly modified the receiver/bolt then added a 24" Green Mountain barrel blank that I machined and chambered to fit. Another Richards rough stock (and hand made high cheek rest) with cheap bipod and cheap Chinese 24x scope. Added (machined to fit) Harrell barrel tuners to both (each one costs almost as much as the rest of the rifle). Was having a hard time finding affordable cases large enough for them so with $18 worth of Home Depot hardware and pine (each) made custom carry cases (unbelievably easy to make).
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Listening to Your Tractor - by Curtis Von Fange. Years ago there was a TV show about a talking car. Unless you are from another planet, physically or otherwise, I don’t think our internal combustion buddies will talk and tell us their problems. But, on the other hand, there is a secret language that our mechanical companions readily do speak. It is an interesting form of communication that involves all the senses of the listener. In this series we are going to investigate and learn the basic rudimentary skills of understanding this lingo.
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.