Posted by Tech 7 on July 15, 2016 at 17:00:42 from (76.64.165.139):
In Reply to: John Deere 2020 posted by Art B on July 14, 2016 at 19:12:57:
The area you describe the leak is in the vicinity of the oil port to the rocker arm shaft. About a year ago a friend of mine called me to help him with ignition issues on an engine he had just put back together and once we got the ignition timing right it started.......and poured oil off the back side of the head. It turned out that the aftermarket head gasket was not punched for the oil passage to the head. I wonder if this is your issue or is it possible that the port got plugged with some debris when it was being worked on. I am not sure from memory exactly the path up through the head that the oil takes other than it goes up through the one rockershaft mount. If ou took it off maybe try some compressed air to see if it would clear? A note to Tx Jim: you ARE areal mechanic....in my book thats better than a tech!
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Cautionary Tale - by Ian Minshull. In the early 1950s my father bought an Allis Chalmers B and I used it for all the row crop work with the mangolds and potatoes, rolling and the haymaking on our farm. The farm and the Allis were sold and I have spent a lifetime working on farms throughout the country. I promised myself that one day I would own an Allis. That time event
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
