I have one, it's made with 4" sch 160 cs pipe, welded on the back 1" plate. I bought it from craigs (sp)list. The carriage was 4 X 4 lumber with a piece of pipe for the axle. Since then, I added the wooden spoke wheels from, I think SD, and go with their axle, it's tapered on each end with one right handed & one left handed ends with nuts. I took a 6" X 4" cs reducer, cut the small end off, slid it over the 4" pipe and a small donut type flat plate to cover the gap between the 6" & 4" pipe. Looks good with the end flared out. I've also drilled and tapped a 1/2" hole where the 1/8" hole was for the fuse. You can get a knocker type thing from Dixie gun works that you use blanks to fire the thing, don't have to use a fuse. You can get black powder & fuse on line, of coarse uncle sam get a fee for this. You can get up to 50 pounds with out a special permit the last time I got some. Might have changed with anti-gun people in DC.
I can shoot a 15.5 oz can of what ever on sale, beans, greens or what ever and 1 oz of black powder and shoot it 359 yards, so watch where you aim. The best things I've done, a friends daughter was going to have her second baby and wanted a way to announce the gender. My friend come by and told me what she wanted. I went on line and found a powder at a India Temple in Utah that made different colored powder, Got that (both colors) and waited. I shot 4 oz blue powder out of that thing and all had a good time and for sure, something new. By the way, the colored powder is corn starch & food coloring. A fun thing to play with, just have to watch everybody so no one gets hurt.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Listening to Your Tractor - by Curtis Von Fange. Years ago there was a TV show about a talking car. Unless you are from another planet, physically or otherwise, I don’t think our internal combustion buddies will talk and tell us their problems. But, on the other hand, there is a secret language that our mechanical companions readily do speak. It is an interesting form of communication that involves all the senses of the listener. In this series we are going to investigate and learn the basic rudimentary skills of understanding this lingo.
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
