Red, I like the way Ray Tractor approaches it, one system at a time!
Don't let this overwhelm you! You won't believe this, but the hardest part of installing a wiring harness, is installing it! Getting the thing strung through all the places it needs to go so it doesn't get cut, burned or pinched, and all the wires reach where they are supposed to go! If you have done that part, the rest is easy!
Remember, any adapted, fit all, even factory harnesses have extra wires that will not be used in your application. Look at any car or truck, you will see dead end wires hanging everywhere!
Start with the obvious. One circuit at a time. I like to make temporary connection first, don't cut anything until you are sure. Once you get it to the point you can make your battery connection, start with everything turned off. Temporally sit the battery cables on. There should be no spark. Remove the battery cable. Then, for example, turn on the light switch. Sit the cable back on. It should make a small spark and the lights come on. If it pops, remove it immediately, something is wrong. If the lights come on, that circuit is right, move on to the next one.
Once you get everything working, go back and tidy everything up. You want this to be a neat, profesional looking job when you are done. Use lots of small black zip ties, shrink tube and solder whenever you make a connection. The split black harness tubing makes for a clean look, and helps protect the wire from thee elements. Avoid tape! It will look good for a short time, then it will start coming unraveled!
Remember to use what you have been provided. A good wiring harness will not repeat colors. You can be reasonably confident that a particular color wire is the same circuit wherever you see that color in the harness. Some harnesses are not color coded, they will be numbered. Same applies, that number wire will be interconnected throughout the harness. Also you can search for wiring examples. Look under "Images". It doesn't have to apply to your specific tractor. Example, "Delco Alternator Wiring" will show dozens of examples, look them over until you find one that you can understand and apply.
Get yourself at least a test light, preferably a test light and a cheap multi meter. They are simple instruments, a real easy way to tell if a circuit is live when it's supposed to be, or a connection is made with what you think it should be. The more you use them, the more comfortable you will get until you wonder how you ever did without them!
Do what you can, then if you get stuck, ask again, be specific. We'll talk you through it!
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
