Posted by oldtanker on September 28, 2016 at 11:42:16 from (66.228.255.59):
In Reply to: Chopping corn (pic) posted by oldtanker on September 27, 2016 at 10:22:06:
Quoting Removed, click Modern View to see
While that's true it isn't how much he's burning per hour, it's how much he's getting done for the amount of work being done. That White is supposed to burn about 6 gallons an hour. According to what I can find the big SP units can chop 5-12 times as much an hour given conditions. So if the SP can chop 5 acres and hour (just an example) on 25 gallons the White with 2 row is going to burn 30 gallons to chop that much. I'm guessing that the numbers are actually higher. An 8 row is going to chop at least 4 times as much at the same ground speed. I know how fast you can push that 2 row without plugging problems. I've seen some of the big ones and I'll bet they are moving 1 1/2 to 3 times as fast if not faster. At 1 1/2 4 times. At 3....12 times. Now go into hired hands. One man operation. Gotta stop at chore time. For what we were doing going to run at least 2 hired men. Going to get less done because that type operation using self unloading wagons isn't going to be as efficient. More time spent not chopping waiting on wagons ECT. If you want an empty wagon waiting on the chopper you better add another man, tractor and at least one wagon. So without getting into the math a custom crew with trucks and say 5 men may be efficient enough to be cheaper than doing it yourself. Each operation would have to see if it would pencil out for them. But you can bet the guys hiring it done are not paying that money out without it being to their good. Another advantage to having it done is less equipment to depreciate and maintain. Just something else to add in.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
