Posted by showcrop on October 23, 2016 at 17:10:16 from (73.238.20.26):
I am resealing the FWA on my Kubota 3010.
This first picture is for general reference of where I am.
This second pic shows the area of question. Right in the middle is the band where the seal actually rides. There is a rusty band at the top (left), then two fairly shiny bands where the main sealing parts of the seal bear. The thin darker rings are between and below where the sealing bands of the seal ride.
The third pic shows the new seal looking at the inner sealing surface showing the two flat sealing bands with the thin groove between. The seal has no lip of any sort.
My concern is that the whole surface that the seal rides on is not at all smooth due to rust. My thought is to clean it up with crocus cloth, if it will do the job, or perhaps emery cloth followed by crocus cloth to smooth it some. Or do they make speedy sleeves or equivalent this large? Or some other sort of smoothing short of taking the assembly off and taking it to a machine shop? Or am I making a mountain out of a mole hill and I should not worry about it leaking?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
