Posted by John M on January 16, 2017 at 05:08:15 from (104.129.204.105):
We have an older Magic Chef mini-fridge at work. Im not sure how old it is, I can find no tags to give me a model number on it anywhere. Im guessing its at least 20 years old, and has been trouble free as long as Ive been here, which is 12 years now. It does have a freezer in the top of it, and about once every 10 months or so it has to be defrosted. It was defrosted over the Christmas break. I Keep a gallon jug of water in it, as our water "cooler" just inst cold enough for me. I came in this morning to find my water completely frozen. After some inspection, I found that the tube for the temp sensor is disconnected and hanging. There is a spot for this tube to attach to the freezer part, but it only holds the tube in place. The remaining length is approximately 10 - 12" long. I do not see anywhere for this to attach to anything, and pics I have found of others it seems to just sit near the freezer or something, as there looks to be no way to attach it to anything. However, those I see online have like a very small bulb on the end. Mine does not have this, and it sort of looks like maybe the end was attached and somehow is now broken. So this leads me to my question: If I can find a new one with the proper wiring connector, that doesnt attach to the freezer section, can I use this, or should I just go ahead and replace the fridge?
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
