This what I do to a carburetor: When I buy a rebuilt kit I will see if I have any Carburetor cleaning solvent. What it is a large can with a metal screen tray in it. This stuff is to clean and soak your carburetors in it. You take the old carburetor apart make sure all the rubber is taken out, gaskets off but you do not have to take the better fly out leave it on. Put the parts on the screen encoding the body parts of the carb. Then put them in to the carb. cleaner solvent let then set for about 1 1/2 Hour then pull them out. Get you air compressor running and use compress air. spraying it threw those gas ports wholes and the other big parts. All small parts like screws, Jets use a good clean rag wipe them dry. Put all the stuff on a clean work table and get your kit them start assembling. This what I do for the holly carb. for my cars and yes some times for my tractors if they are really bad and dirty. There are those times when Yes a light clean will do the trick but use your judgement on the carburetor on how it looks. Good Luck.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: Black Tire Paint - by Staff. I have been fortunate in that two of my tractors have had rear tires that were in great shape when I bought the tractor. My model "H" even had the old style fronts with plenty of tread. My "L" fronts were mismatched Sears Guardsman snow tires, which I promptly tossed. Well, although these tires were in good shape as far as tread was concerned, they looked real sad. All were flat, but new tubes fixed that. In addition to years and years of scuffing and fading, they had paint splattered on
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
