Pilots have the right to fly in rural areas about anywhere. Those rules got put in place mostly for crop spraying a few years ago. Pilot needs to stay above any man made structure is more or less the rules, in city areas there is a 400 foot rule, more or less. Planes should stay at 500 feet or higher other than landing/ takeoff.
Hobby airplanes should stay below 400 feet more or less.
Now we come to drones. They are considered aircraft, but they need to follow much of the rules of hobby planes. It is a terrible mush mash right now. The drone technology happened faster than the aviation rules could be written.
But if you shoot down a drone, you will be considered to have shot at a regular airplane, and dealing with ford rail laws on that. I would not want to be in your shoes.
Now, as to the original post, there is lots of rules the past 2 years, every drone over 1/2 a lb in weight the person flying has to be registered with the FAA and follow the rules that are in place, and there are many rules in place. Again if a pilot of a drone is caught disobeying the rules they are dealing with federal laws, so they can be in pretty deep trouble.
You folk need to look into this more, lot of mis information out there.
Currently the Feds are concerned with protection the airspace both big real planes and tiny small drones fly in, so most of their rules have been trying to get that worked out. Also they have many rules about flying over crowds or popular public places like Old Faithful and the like. You are t allowed to fly a drone over a fair or grandstands or the like, crowds and so forth. And flying by an airport is a very serious no no.......
Current drones don't have zoom feature on the camera, so a Google sat picture can be pretty close to as detailed, but of course a drone can angle sideways on stuff. As we move forward the rules on flying over private property likely will change to protect folks a bit more from that side of things.
Now sure there are a lot of 'here hold my beer' drone owners out there, so more needs to be done. But the rules and laws and registration is there, they just are trying to catch up with some more of the details.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
