Posted by tanner7212 on March 07, 2017 at 08:51:26 from (73.143.156.14):
Hello! I have a '54 Ferguson TO-30 with a Davis 100 loader and I am planning to do some re-painting this spring. I don't have much experience in painting tractors or implements so I am looking for any advice I can get! My plan is to take the loader off and paint that, which seems simple enough. However, painting the tractor itself intimidates me a bit. I am comfortable painting the sheet metal, rims, all the "easy" stuff that I can remove. However I am not sure about painting the chassis as I don't really want to have to take it completely apart. I also will probably not even bother with the engine. I am not doing a full restoration, I just want to give the old gal a nice new coat of paint. Is there anything I should know before I dive into it? Any tips or suggestions would be greatly appreciated!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
