Posted by sotxbill on April 12, 2017 at 18:38:44 from (104.5.24.112):
Bought a very heavy duty hardee 84 inch rotary cutter, with a 250hp gear box. Similar to the rtw72 cutters but a foot wider. Anyway broke a blade and cant not find a part number on the cutter anywhere or a blade reference for the blade.
The other blade on there measures aroun 20 5/16 inch long, 4 inches wide, and 1/2 inch thick. This blade has NO offset and is a straight blade. Its a bit weird with no offset and that its a double sided blade but has a slight lift on the unused side near the tip, giving it some lift, so I am not sure if it was meant to be double sided or a lift blade or both.
Anyway, any help on finding the blade or mower model number will be appreciated. Although it looks like the rwt72, it does not have the push bar on the rear for pushing over trees. And as said, its every bit of 84 inches wide.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Smells - by Curtis Von Fange. We are continuing our series on learning to talk the language of our tractor. Since we can’t actually talk to our tractors, though some of the older sect of farmers might disagree, we use our five physical senses to observe and construe what our iron age friends are trying to tell us. We have already talked about some of the colors the unit might leave as clues to its well-being. Now we are going to use our noses to diagnose particular smells. ELECTRICAL SMELLS
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.