Posted by picassomcp on April 20, 2017 at 17:49:35 from (172.76.43.147):
I had a leak there the fuel line comes into the pump. I loosened the fuel line fitting that screws into the pump body, it felt kinda springy and when I got it out totally I saw that there was a screen piece attached to the fitting that I was loosening. This screen fitting was screwed into the pump body and the line was screwed into the fitting. So I unscrewed the screen fitting from the fuel line and tried to screw it back into the injector pump. I couldn't get the screen fitting far enough into the pump body to get the threads started as a spring was fighting me. I monkeyed around for a while and pretty soon all springy action was gone. It was clear to me that something was wrong. I looked into the pump and saw the spring laying down sideways and a metal plunger looking piece laying in there as well. I went and got my manual that had a breakdown of the pump and could see what was going on. This spring was supposed to go inside the spring fitting, then the plunger piece was to go in after the spring. I fished out the spring and plunger, put them into the screen fitting and went to screw the screen fitting back into the pump. It screwed right in, there was no springy action at all. Is this normal and correct? It seems like something maybe wrong or another piece missing being that I lost the springy action that was there when I originally turned it out of the pump. Any help or ideas appreciated. Thanks
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - When Push Comes to Shove - by Dave Patterson. When I was a “kid” (still am to a deree) about two I guess, my parents couldn’t find me one day. They were horrified (we lived by the railroad), my mother thought the worst: "He’s been run over by a train, he’s gone forever!" Where did they find me? Perched up on the seat of the tractor. I’d probably plowed about 3000 acres (in my head anyway) by the time they found me. This is where my love for tractors started and has only gotten worse in my tender 50 yrs on this “green planet”. I’m par
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
