Posted by Andy Martin on June 18, 2017 at 20:31:05 from (209.213.149.120):
In Reply to: Too Much HP For Baler? posted by Bryce Frazier on June 18, 2017 at 17:42:34:
Quoting Removed, click Modern View to see
I made that comment because his SM doesn't have a live PTO. One way you make it through heavy spots is you pop it into neutral and let the baler clear then back in gear and go on, a lower gear if necessary. Baling with a Farmall in third gear if you want to downshift before it lugs the tractor down you can ease it into neutral without using the clutch and on the next baler stroke go right into second, still no clutch and no gear clash. My dad taught me that and it's slick as snot. Got to clutch to get back to third, however. I imagine it's a little faster with a live PTO, and I've tried it once, but didn't like it. If you're paying attention (and you don't have anything else to do) you can bale without live PTO quite nicely. I don't use hay wagons because I have no help, just use a NH bale wagon, again behind an M. I was doing about 15,000 bales per year. I'd usually go all year without breaking a shear pin, then with a worn adjustment I'd break two or three in one day.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Cautionary Tale - by Ian Minshull. In the early 1950s my father bought an Allis Chalmers B and I used it for all the row crop work with the mangolds and potatoes, rolling and the haymaking on our farm. The farm and the Allis were sold and I have spent a lifetime working on farms throughout the country. I promised myself that one day I would own an Allis. That time event
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
