Posted by soldbybrock on July 01, 2017 at 23:38:55 from (96.44.122.176):
okay ... so after finally getting up and running and adjusting the tucker fingers as people here last told me i've got a knotter issue again
so once i was running i got a good 400 bales, with minimal problems
but the last 200 bales i was getting a slipped knot ... at least thats what it looks like ... every 20 or so bales ......... then it became every 5 bales i would get this 'slip'
so what it is is .... when you look at the #1 string (on top) has no knot in it and the #3 string (that has come up from the bottom of the bale) has a lose knot
the ends are cut perfectly
i have adjusted the tucker fingers ... more tight, more loose ... cause honestly i dont know what the difference is one way or the other
i have put more tension on the twine disk holders
i put more and and less tension on the billhook tension
nothing is working and i'm out of ideas and i have about 500 bales down to get baled in the next few days before cutting again
hopefully someone here can direct me to what to do or look at, thanks again
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Listening to Your Tractor - by Curtis Von Fange. Years ago there was a TV show about a talking car. Unless you are from another planet, physically or otherwise, I don’t think our internal combustion buddies will talk and tell us their problems. But, on the other hand, there is a secret language that our mechanical companions readily do speak. It is an interesting form of communication that involves all the senses of the listener. In this series we are going to investigate and learn the basic rudimentary skills of understanding this lingo.
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
