Re: Rollover Point
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Gerald on October 25, 1998 at 20:04:34:
In Reply to: Rollover Point posted by Fred on October 25, 1998 at 17:47:12:
: Is there any standard that new tractors must meet when it comes to operating on hillsides? I'm just wondering if it is possible to know how much slope can be negotiated (slowly) without a definite rollover. I have the wheels adjusted out as far as possible, loaded tires, and have ROPS. There are some places where I must either mow across the hill or let it go. : Thanks. There is an SAE (Society of Automotive Engineers) standard for testing the roll over point, but I don't remember there is one specifying what it must be. You may be able to ask the engineering department of your tractor's maker for the center of gravity and then work out the geometry that the tractor keeps the wheels down so long as the gravity vector from that center of gravity is never placed OUTSIDE the center of the rear wheels. I saw this question asked not too long ago and there was a hint that the center of gravity might be in some more recent Nebraska Tractor test details. Some of those can be found by internet from Nebraska Extension and probably most any ordered for a price. It will be a hard thing to get answered precisely because on sloping dirt as you put most of the load on the down hill tire the dirt there is going to give unpredictably and tip you further than you wish. And the ROPS may save your neck if you are wearing a seat belt, but the front of the tractor may not be pretty afterwards. Maybe those really sloped places should be hired out to a weed wacker or a herd of goats or sheep... Gerald
Follow Ups:
Post a Followup
|
