Posted by Steve@Advance on August 03, 2017 at 20:09:41 from (66.169.147.211):
In Reply to: NEWBIE posted by Justinjones6381 on August 03, 2017 at 18:58:39:
Welcome Justin!
There are a lot of decisions that need to be made first.
What will you be doing with the tractor once finished?
If this is going to be a working tractor, you'll want to concentrate on getting everything mechanical working correctly. How far you want to go is up to you and your finances. You could do the basics, get it running, see what else rears it's head, deal with the problems as they arise. But avoid cutting corners, do it right, do it once. Also consider doing any upgrades, electronic ignition, alternator, these things improve reliability, what you need for a working tractor.
Another option is a "parade tractor" or light use tractor. This gets a partial tear down, fix what needs fixing, stop the oil leaks, a decent paint job. Something you can be proud of when done, but not afraid to get it dirty doing a little mowing.
The most serious is a "true restoration". The entire tractor is disassembled, down to the last screw. Then put back with no corners cut, no after market parts if avoidable, a professional paint job, and tons of money and time! I seriously would not recommend this for a first time effort.
Lastly, if you have any intention of doing this to turn a profit, forget it! You will spend way more than you can ever get for one of these old tractors! Best done for sentimental reasons or just as a hobby and the satisfaction of a job well done.
Once you decide to get started, the first thing to buy is a good shop manual. Start reading it before you ever turn the first bolt! Pour over it, study it, get into the mind of the engineer that designed it! You will be amazed with the things you find that would have been overlooked otherwise. The manuals will more than pay for themselves in mistakes not made!
And you will need plenty of space to work in. Something with a concrete floor, protection from the weather, preferably climate controlled. Procure some tables, some large surfaces you can lay parts out on, sort, bag and label, and photograph. Once the tables are full, sort and store in containers to free up the table space. You'll need a safe and effective way to wash greasy parts, and a pressure washer. Connections with a reputable machine shop is a big plus.
As for body work, some people are naturally inclined to do it, and do quite well. Myself, I hate it with a passion and always turn decent into disaster! But trying to do it in the same room as the mechanical work is done will get real messy. Consider the cost verses the hassle and the result, you may want to hire that part out, your decision.
Hope this is in the ball park of what you were asking, let us know. No such thing as a dumb question! Youtube is your friend!
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
