Posted by ggb3 on August 18, 2017 at 14:58:49 from (174.126.108.182):
Hi Y'all
I have a 73' Ford 4000 diesel and have been wanting to change the hydraulic oil filter over to the "new" 4600 style with an external spin-on as reported by user Destroked on this site/forum.
I am near the Gulf Coast of Mississippi (Biloxi) and tractor salvage yards are rare in these parts. With that wrote, I was wonderin if anyone near a good tractor salvage yard would be interested in gathering the parts and I will pay for the parts, shipping, and pay you well for your time.
If you have been a member of this forum and have a reasonable number/content of posts, I will pay you in-advance. I am in no hurry, the tractor is apart in a ~110 degree garage and will wait till winter for me to get back to it.
I have a list of parts compiled from other posts on the matter as well as the various model of tractors that has this configuration. They are not really a wear or frequently damaged item, so they should be around a good yard with plenty of Fords. My email should be open.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
