Posted by ptfarmer on August 22, 2017 at 10:05:57 from (70.114.32.211):
In Reply to: MF 135 steering tube posted by stillatit on August 22, 2017 at 09:04:31:
The hex nut between the tube, and tie rod end is a jam nut to hold the tie rod from turning. You have to loosen the jam nut then unscrew the tie rod end from the tube. One end of the tube is right hand thread, the other end is left hand thread. Look at the threads on the tie rod ends for which way they turn to loosen, the jam nut is screwed onto the tie rod itself. They have the right hand thread on one end, and left hand thread on the other end so you can adjust the length of the tube (it's called a drag link) without having to remove either end of tie rod from the arms to adjust the length.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
