Yup, notice similar stuff at 67. I still climb ladders (was near the top of a 28 footer week or so ago). I don't hurry, take one step at a time, making sure I've got good footing and a good grip. I had a paint can and brush in one hand but thought real hard about every move.
Like Joe said, you don't have to fall far to get hurt. A couple of years ago, I was working in a barn, remodeling a stall into a tack room. I was on a 6' ladder with a nail gun. Stepped down (thought I was on the lowest step). I was on the SECOND STEP! My foot kept going and before I knew it, I fell on my butt on a pile of scrap 2x4's with nails still in them and hit the back of my head HARD against the 2x10 stall wall. I heard a BANG, thought the nail gun went off and realized it was my head hitting the wall. I was pretty dazed for a few minutes. I looked to my left and about 2" from my left cheek was a 16d nail sticking through the 2x10 wall from the other side. :shock: I got up, checked for blood and somehow missed all the nails in the pile of boards. To this day, I realize that was the closest I've come to checking out while working with tools. Like Bret says, in our younger days, we'd walk along beams, across trusses, jump ditches, jump off 1 story roofs, etc.
I no longer rush things, I think through each motion when working with tractors, table saws, chain saws, ladders, etc. I still do stuff that my wife cringes about, but I'm VERY careful in everything I do.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Lifetime of Farm Machinery - by Joe Michaels. I am a mechanical engineer by profession, specializing in powerplant work. I worked as a machinist and engine erector, with time spent overseas. I have always had a love for machinery, and an appreciation for farming and farm machinery. I was born and raised in Brooklyn, New York. Not a place one would associate with farms or farm machinery. I credit my parents for instilling a lot of good values, a respect for learning, a knowledge of various skills and a little knowledge of farming in me, amo
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
