Posted by Texasmark1 on October 11, 2017 at 06:00:22 from (99.197.190.172):
In Reply to: Flex link lower arms posted by bcny on October 09, 2017 at 14:21:15:
ASC and similar places sell Pat's Quick Hitches. Cat. 1 is about $170. Cat 2, about $190. Extends your arms out about 3" so you may need to buy the longer adjustable 3rd member which TSC sells. The added length adds a little "feet" to the foot-pounds equation...implements seem to be a tad heavier.
ASC sells the hitches and includes the adjustable connecting bar in the price (other places charge extra). Here's how it works:
You back up to your implement but stop just before you get to it. Adjust the connecting bar to set your width to suit the implement. Flip the locking lever on the hitch to unlock. Drop your 3 pt and slowly back your arms under the implement pins. Lift the 3 pt. Flip your locking lever to lock. Attach and adjust your 3rd member. Get back on your tractor, lift your 3 pt and go about your business. That simple.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
