I've got a 16' low deck car hauler style flatbed, we replaced the rotted wood floor with thread plate, we have a set of slide in cattle racks made from 1" square tubing.
It takes two people to slide them in, maybe one with a good back but two is better.
I drilled the racks bottom tube and side flange on the trailer at each corner so that four 3/8" bolts holds the racks in place.
It does a decent job and so far has keep me from financing a standard stock trailer.
It does have 3 issues that I'll list.
(1) utility trailers have a higher floor height than stock trailer, several times we've had cattle balk at stepping up into the trailer from ground level, hogs would try to go under so some type of loading chute is needed for easy loading of live stock.
(2) my trailer is the standard duty car hauler with 3500 lb axles (7000 lb gvw), 5 lug 15" wheels and tires making it very easy to overload, 8 1000-12000 lb cows will easily fit or 15-18 500-600 lb calves, this puts combined weight at around 10,000 lbs.
A trailer rated at 10-12,000lbs would be better but cost considerably more, stock trailers I've been looking at are rated for 12-14,000 lbs.
(3) in my case the steel thread plate floor gets slick and stock has trouble standing during transport, some type of rebar needs to be welded to the floor or a thick rubber mat to prevent falling.
This adds more weight and for me I'd want the mat removable to keep the floor from rusting or rotting out quicker.
One can find a good deal on a used flat bed trailer but needs to find one with weight rating equal to comparable stock trailer.
I found 16' slide in racks on the web for $2000-2500 so depending on trailer cost one can come out cheaper with a better built chassis, but you still have to deal with the extra 6-8" height when loading.
I'll have my new disc mower paid off next year, baler the year after that, at that point I'll probably get serious about a real stock trailer, although I hate spending money on a specialty trailer that will only be used 4-5 times per year.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Question for Dads This recent topic from the Tractor Talk discussion board is being highlighted because it is an awesome display of the caliber of individuals that have made this site their own. The young person asking questions received positive feedback and advice from total strangers who "told it like it is" with the care many reserve for their own kids. The advice is timeless... so although it isn't necessarily antique tractor related, it will be prominently displayed in our archives to honor those who have the courage to ask and those who have the courage to respond in an honest, positive manner.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
