Posted by 003Ryder on November 03, 2017 at 20:30:00 from (71.37.121.110):
Hello everyone! I picked up a Ford 861 Diesel tractor a little while ago from a good friend who passed away. It was his "Daily Driver" tractor and has been used quite a bit. Im not sure on the year. It has the 5-speed, live P.T.O, and power steering, however both the hydraulic are shot and most of the hoses need to be replaced (a future project). Anyway I pulled it out of the boneyard a few days ago and started doing little things to it (Change all fluids and filters, flushed fuel system etc.) It smokes a little bit but runs very smooth. One thing I noticed was as I used it and got the engine warming up the oil pressure would constantly drop. (From 40psi when cold to hovering at about 20-22psi at 1,000rpm) Im wondering if this is a problem or if thats just happens when the engine gets warm. What do you guys thing about it? i'm thinking about possibly restoring it, but not sure if its worth doing or not. Any opinions or information would be greatly appreciated
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.