Posted by docmirror on March 18, 2018 at 07:40:29 from (107.213.165.255):
In Reply to: Home fire fighting posted by JimS on March 16, 2018 at 19:02:47:
I have a structure in the NM mountains with heavy pine and fir all around me. It would be a big job to cut back 100' clearance around the home, and I really don't want to do that either. I spoke with our local fire dept chief and of course, he said mitigation first is far better than fighting the fire once going. But - his suggestion which I took up was to get a very old pumper and tank from a decommissioned fire station, make sure the hoses and pump are good and have it parked and ready to use.
His rationale, which makes perfect sense to me is that much of the equip from the 70s and 80s is hardly used, and with some careful maint and new hoses can still be very effective.
Last fall I bought a 1989 Hush pumper with 750 gal and two discharge ports which can deliver 1000GPM. I had to fix the brakes, and some other small jobs but now it sits behind my house, ready to work. It took me two weeks to learn all the stuff, how to pump, how to spray, and lots of time testing things.
The only downside to this is that if the smoke is too heavy for people to breath, it's also too heavy for the engine to run. Same with the small home pumper systems. I figure if I don't use it, someone from the fire station will get it running and make use of it. I can't keep the tank filled in winter as it will freeze and destroy the pump and maybe the tank. I'm going up there in early April and fill it up, and check everything out again.
It has the good old Detroit diesel and Allison auto trans, bulletproof to run, but takes a lot of gas.
I paid $7000 for it, and drove it from central NE to middle of NM.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - 12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.